Model/Brand/Package
Category/Description
Inventory
Price
Data
-
![]()
Category: surge protectionDescription: Transient Voltage Suppressor; 120V; 20A; 2-Wire GND; 25kA (Line-Neutral)1258 -
![]()
Category: surge protectionDescription: Power Conditioner; 240V; 20A; 2 Wire GND; 25kA (Line-Neutral); lt 0.5ns8730 -
![]()
Category: surge protectionDescription: Surge Arrestor 3-Electrode Arrestor 420V Thru-Hole Tray90075+$12.457050+$11.9246200+$11.6265500+$11.55201000+$11.47752500+$11.39235000+$11.33917500+$11.2858 -
![]()
Category: surge protectionDescription: TRIPP-LITE DTEL2 Surge Protector, Network / Phone, DATASHIELD Series, Data Line, 4Outlets, RJ11, RJ45, 230V45831+$73.739210+$70.5331100+$69.9560250+$69.5072500+$68.80181000+$68.48122500+$68.03245000+$67.6477 -
![]()
Category: surge protectionDescription: Cooper Bussmann SPD Solutions - IEC The Cooper Bussman IEC SPD solution consists of a base and locking module that features a combined disconnection and short-circuiting (shunting) device with safe electrical isolation to prevent fire damage due to DC arcs. An integrated DC fuse allows safe module replacement without arc formation. In case of insulation faults in the generator circuit, a reliable and tested fault-resistant Y circuit prevents damage to the surge protective devices. The green and red visual indicator flags show the module protective status (green = good, red = replace). Apart from this visual indication, the remote signalling option features a three terminal floating changeover contact that can be used as a make or break contact depending on the particular monitoring system design employed. Modular DIN-Rail design with colour-coding and rejection feature makes it easy to identify, install and maintain Built-in overcurrent protection eliminates the need for any additional fuse installation and wiring easyID™ Visual indication and optional remote contact signaling make status monitoring simple Fast-acting Short-Circuit Interrupting (SCI) technology responds efficiently to overvoltage conditions ### Surge protection equipment, SPD (DIN rail) voltage surge is often referred to as peak or transient overvoltage, which is usually caused by switch fluorescent lamps, fuse burnout, or nearby lightning activity. The worst voltage surges are usually caused by lightning, with voltages up to 6000V and current surges exceeding 3000A. The maximum value of voltage and current surges caused by lightning strikes depends on the location within the building's wiring system. BS7671: First revised edition in 2011, sections 443 and 534 cover risk assessment and provide guidance on electronic device protection for installation engineers to follow. The BSEN 62305 standard series provides the most comprehensive information on lightning and surge protection.79831+$1082.373010+$1044.395050+$1039.6478100+$1034.9005150+$1027.3049250+$1020.6588500+$1014.01261000+$1006.4170 -
![]()
Category: surge protectionDescription: Surge Arrester 3-electrode Surge Arrester22885+$19.990650+$19.1363200+$18.6579500+$18.53831000+$18.41872500+$18.28205000+$18.19667500+$18.1112 -
![]()
Category: surge protectionDescription: Bourns 1500 Series Gigabit Ethernet SPD GDT/TBU ® High speed protector technology, low pulse allowed high surge current rating, provides isolation and grounding models 10/100/1000, data compatibility 5kV isolation applications include: data communication, highly exposed Ethernet 1000 Base-T Gigabit Ethernet, indoor/controlled environment installation, telecommunications and industrial installation # # Transient Voltage Suppressors (In line)87691+$1177.279410+$1166.576925+$1161.225650+$1155.8743100+$1150.5231150+$1145.1718250+$1139.8205500+$1134.4692 -
![]()
Category: surge protectionDescription: Bourns 1977 Series High Frequency Coaxial SPD High Load Design High Frequency DC-5 GHz DC Pass to ± 48 V VSWR Low Insertion Loss Bidirectional Waterproof Removable Gas Tube Three Grounding Options # # Transient Voltage Suppressors (In line)65891+$1089.920910+$1051.678150+$1046.8977100+$1042.1174150+$1034.4688250+$1027.7763500+$1021.08381000+$1013.4353 -
![]()
Category: surge protectionDescription: Bourns 1977 Series High Frequency Coaxial SPD High Load Design High Frequency DC-5 GHz DC Pass to ± 48 V VSWR Low Insertion Loss Bidirectional Waterproof Removable Gas Tube Three Grounding Options # # Transient Voltage Suppressors (In line)77271+$973.635210+$939.472650+$935.2023100+$930.9319150+$924.0994250+$918.1210500+$912.14251000+$905.3100 -
![]()
Category: surge protectionDescription: Bourns 1210 Series surge protection equipment with a maximum discharge current rating of 100 kA, multi pole single block design, DIN rail installation, integrated thermal disconnect visual fault indicator in accordance with UL 60691 standard, remote signal function, compact design, especially suitable for limited space surge protection equipment. SPD (DIN rail) voltage surge is often referred to as peak or transient overvoltage, which is usually caused by switch fluorescent lamps, fuse burnout, or nearby lightning activity. The worst voltage surges are usually caused by lightning, with voltages up to 6000V and current surges exceeding 3000A. The maximum value of voltage and current surges caused by lightning strikes depends on the location within the building's wiring system. BS7671: First revised edition in 2011, sections 443 and 534 cover risk assessment and provide guidance on electronic device protection for installation engineers to follow. The BSEN 62305 standard series provides the most comprehensive information on lightning and surge protection.36271+$2256.832610+$2236.315925+$2226.057650+$2215.7993100+$2205.5410150+$2195.2826250+$2185.0243500+$2174.7660 -
![]()
Category: surge protectionDescription: Bourns 1210 Series surge protection equipment with a maximum discharge current rating of 100 kA, multi pole single block design, DIN rail installation, integrated thermal disconnect visual fault indicator in accordance with UL 60691 standard, remote signal function, compact design, especially suitable for limited space surge protection equipment. SPD (DIN rail) voltage surge is often referred to as peak or transient overvoltage, which is usually caused by switch fluorescent lamps, fuse burnout, or nearby lightning activity. The worst voltage surges are usually caused by lightning, with voltages up to 6000V and current surges exceeding 3000A. The maximum value of voltage and current surges caused by lightning strikes depends on the location within the building's wiring system. BS7671: First revised edition in 2011, sections 443 and 534 cover risk assessment and provide guidance on electronic device protection for installation engineers to follow. The BSEN 62305 standard series provides the most comprehensive information on lightning and surge protection.61401+$3867.077510+$3831.922325+$3814.344650+$3796.7670100+$3779.1894150+$3761.6118250+$3744.0341500+$3726.4565 -
![]()
Category: surge protectionDescription: Bourns DC surge protection equipment matched with high-energy MOV internal thermal disconnect status indicator replaceable modular design DIN rail compatible base remote signal function # # # Surge protection equipment, SPD (DIN rail) voltage surge is often referred to as peak or transient overvoltage, which is usually caused by switch fluorescent lamps, fuse burnout, or nearby lightning activity. The worst voltage surges are usually caused by lightning, with voltages up to 6000V and current surges exceeding 3000A. The maximum value of voltage and current surges caused by lightning strikes depends on the location within the building's wiring system. BS7671: First revised edition in 2011, sections 443 and 534 cover risk assessment and provide guidance on electronic device protection for installation engineers to follow. The BSEN 62305 standard series provides the most comprehensive information on lightning and surge protection.25001+$823.938410+$795.028350+$791.4145100+$787.8008150+$782.0187250+$776.9595500+$771.90021000+$766.1182 -
![]()
Category: surge protectionDescription: Bourns 1250 Series surge protection equipment with a maximum discharge current rating of 50 kA, multi pole single block design, DIN rail installation, integrated thermal disconnect visual fault indicator in accordance with UL 60691 standard, remote signal function, compact design, especially suitable for limited space surge protection equipment. SPD (DIN rail) voltage surge is often referred to as peak or transient overvoltage, which is usually caused by switch fluorescent lamps, fuse burnout, or nearby lightning activity. The worst voltage surges are usually caused by lightning, with voltages up to 6000V and current surges exceeding 3000A. The maximum value of voltage and current surges caused by lightning strikes depends on the location within the building's wiring system. BS7671: First revised edition in 2011, sections 443 and 534 cover risk assessment and provide guidance on electronic device protection for installation engineers to follow. The BSEN 62305 standard series provides the most comprehensive information on lightning and surge protection.80481+$1404.003710+$1391.240025+$1384.858250+$1378.4764100+$1372.0945150+$1365.7127250+$1359.3309500+$1352.9490 -
![]()
Category: surge protectionDescription: Bourns 1250 Series surge protection equipment with a maximum discharge current rating of 50 kA, multi pole single block design, DIN rail installation, integrated thermal disconnect visual fault indicator in accordance with UL 60691 standard, remote signal function, compact design, especially suitable for limited space surge protection equipment. SPD (DIN rail) voltage surge is often referred to as peak or transient overvoltage, which is usually caused by switch fluorescent lamps, fuse burnout, or nearby lightning activity. The worst voltage surges are usually caused by lightning, with voltages up to 6000V and current surges exceeding 3000A. The maximum value of voltage and current surges caused by lightning strikes depends on the location within the building's wiring system. BS7671: First revised edition in 2011, sections 443 and 534 cover risk assessment and provide guidance on electronic device protection for installation engineers to follow. The BSEN 62305 standard series provides the most comprehensive information on lightning and surge protection.10701+$529.765910+$515.945950+$505.3506100+$501.6653200+$498.9013500+$495.21601000+$492.91262000+$490.6093 -
![]()
Category: surge protectionDescription: Bourns 1250 Series surge protection equipment with a maximum discharge current rating of 50 kA, multi pole single block design, DIN rail installation, integrated thermal disconnect visual fault indicator in accordance with UL 60691 standard, remote signal function, compact design, especially suitable for limited space surge protection equipment. SPD (DIN rail) voltage surge is often referred to as peak or transient overvoltage, which is usually caused by switch fluorescent lamps, fuse burnout, or nearby lightning activity. The worst voltage surges are usually caused by lightning, with voltages up to 6000V and current surges exceeding 3000A. The maximum value of voltage and current surges caused by lightning strikes depends on the location within the building's wiring system. BS7671: First revised edition in 2011, sections 443 and 534 cover risk assessment and provide guidance on electronic device protection for installation engineers to follow. The BSEN 62305 standard series provides the most comprehensive information on lightning and surge protection.70251+$2503.304110+$2480.546825+$2469.168150+$2457.7895100+$2446.4108150+$2435.0322250+$2423.6535500+$2412.2749 -
![]()
Category: surge protectionDescription: Surge Arrestor 2-Electrode Arrestor 345V 2.5kA Thru-Hole Taped Strip4783 -
![]()
Category: surge protectionDescription: Surge Arrestor 1Pole Single Block Unit DIN Rail97101+$1187.451110+$1176.656125+$1171.258650+$1165.8611100+$1160.4636150+$1155.0661250+$1149.6686500+$1144.2711 -
![]()
Category: surge protectionDescription: Cooper Bussmann SPD Solutions - Photovoltaic The Cooper Bussman Photovoltaic SPD solution consists of a base and locking module that features a combined disconnection and short-circuiting (shunting) device with safe electrical isolation to prevent fire damage due to DC arcs. An integrated DC fuse allows safe module replacement without arc formation. In case of insulation faults in the generator circuit, a reliable and tested fault-resistant Y circuit prevents damage to the surge protective devices. The green and red visual indicator flags show the module protective status (green = good, red = replace). Apart from this visual indication, the remote signalling option features a three terminal floating changeover contact that can be used as a make or break contact depending on the particular monitoring system design employed. Modular DIN-Rail design with colour-coding and rejection feature makes it easy to identify, install and maintain Built-in overcurrent protection eliminates the need for any additional fuse installation and wiring easyID™ Visual indication and optional remote contact signaling make status monitoring simple Fast-acting Short-Circuit Interrupting (SCI) technology responds efficiently to overvoltage conditions ### Surge protection equipment, SPD (DIN rail) voltage surge is often referred to as peak or transient overvoltage, which is usually caused by switch fluorescent lamps, fuse burnout, or nearby lightning activity. The worst voltage surges are usually caused by lightning, with voltages up to 6000V and current surges exceeding 3000A. The maximum value of voltage and current surges caused by lightning strikes depends on the location within the building's wiring system. BS7671: First revised edition in 2011, sections 443 and 534 cover risk assessment and provide guidance on electronic device protection for installation engineers to follow. The BSEN 62305 standard series provides the most comprehensive information on lightning and surge protection.80241+$1122.205710+$1112.003825+$1106.902950+$1101.8020100+$1096.7010150+$1091.6001250+$1086.4992500+$1081.3982 -
![]()
Category: surge protectionDescription: Bourns 1500 Series Gigabit Ethernet SPD GDT/TBU ® High speed protector technology, low pulse allowed high surge current rating, provides isolation and grounding models 10/100/1000, data compatibility 5kV isolation applications include: data communication, highly exposed Ethernet 1000 Base-T Gigabit Ethernet, indoor/controlled environment installation, telecommunications and industrial installation # # Transient Voltage Suppressors (In line)71391+$1223.132910+$1212.013525+$1206.453850+$1200.8941100+$1195.3344150+$1189.7747250+$1184.2150500+$1178.6553 -
![]()
Category: surge protectionDescription: Bourns DC surge protection equipment matched with high-energy MOV internal thermal disconnect status indicator replaceable modular design DIN rail compatible base remote signal function # # # Surge protection equipment, SPD (DIN rail) voltage surge is often referred to as peak or transient overvoltage, which is usually caused by switch fluorescent lamps, fuse burnout, or nearby lightning activity. The worst voltage surges are usually caused by lightning, with voltages up to 6000V and current surges exceeding 3000A. The maximum value of voltage and current surges caused by lightning strikes depends on the location within the building's wiring system. BS7671: First revised edition in 2011, sections 443 and 534 cover risk assessment and provide guidance on electronic device protection for installation engineers to follow. The BSEN 62305 standard series provides the most comprehensive information on lightning and surge protection.49011+$838.071010+$808.665050+$804.9893100+$801.3135150+$795.4323250+$790.2863500+$785.14021000+$779.2590 -
![]()
Category: surge protectionDescription: TRIPP-LITE TRAVELCUBE Surge Protector, Plug In, Protect It! Series, Outlet Strip, 1Outlets, NEMA 5-15R, 120VAC99991+$83.028910+$79.4189100+$78.7691250+$78.2637500+$77.46951000+$77.10852500+$76.60315000+$76.1699 -
![]()
Category: surge protectionDescription: TRIPP-LITE TLP1008TELTV Surge Protector, Coax, Telco Protection, 10Outlets, NEMA 5-15R, 15A, 120V, NEMA 5-15P, 2.5m99991+$287.210210+$279.717850+$273.9736100+$271.9756200+$270.4771500+$268.47911000+$267.23042000+$265.9816 -
![]()
Category: surge protectionDescription: TRIPP-LITE TLP1008TEL Surge Protector, Telco Protection, 10Outlets, NEMA 5-15R, 15A, 120V, NEMA 5-15P, 2.5m99991+$320.163510+$311.811450+$305.4081100+$303.1809200+$301.5104500+$299.28321000+$297.89122000+$296.4992
